Menu Definition Tables - SATO LT408 Operator's Manual

MENU DEFINITION TABLES

MENU
ONLINE
QTY: 000000
OFFLINE
QTY: 000000
ONLINE MODE
USER MODE
OFFSET VOLUME
PITCH +X.XX
OFFSET -X.XX
DARKNESS XX
PRINT SPEED
XX IPS
PRINT DARKNESS
1 2 3 4 5
PITCH OFFSET
+XX MM
Lt408 Operator Manual
Unit 4: Printer Configuration
USER MODE (TABLE 4-1)
Displays the operational status of the printer. The ONLINE status is displayed on the top
line and the label quantity status on the bottom. The message will be changed to
OFFLINE whenever the printer is switched offline by pressing the LINE key. When a
print job is received, the quantity line will indicate the number of labels to be printed. As
the label job prints, the display indicates the number of labels remaining to be printed.
Displays the operational status of the printer. The OFFLINE status is displayed on the
top line and the label quantity status on the bottom. The message will be changed to
ONLINE whenever the printer is switched online by pressing the LINE key.
Is a transitional screen that allows the operator to choose a given direction within the
menu map.
Is the entrance screen of the User Mode. The User Mode allows various print
parameters to be set.
This screen shows the adjusted value for the potentiometers on the Operator Panel.
Entry is not required for this screen. The values will change as the potentiometers are
adjusted.
Permits the printer's print speed to be established based on inches per second (IPS).
Permits the adjustment of the print density. Higher print density equates to darker print
images.
The label pitch is the distance from the leading edge (the edge that comes out of the
printer first) of a label and the leading edge of the next label. The position of the label's
leading edge can be adjusted relative to the print head in increments of 1mm. Once the
position has been set, it can be fine adjusted using the PITCH potentiometer.
Positive (+) digit selection on the display moves the leading edge forward and away
from the print head while a negative (-) selection moves the label's leading edge
incrementally back into the mechanism.
4-20
DESCRIPTION
PN: 9001152A