Print Head; Adjustment Procedures; Print Head Alignment - SATO LT408 Operator's Manual

ADJUSTMENT PROCEDURES

This unit covers all of the printer and printer accessory adjustments. These adjustments include mechanical
adjustments required following the replacement of components and assemblies, in addition to, the operational
adjustments required following a job change.

PRINT HEAD ALIGNMENT

Print head position has a direct impact on print quality. The print head must be parallel with the platen roller for the
printed image to be consistent across the label.
To adjust the alignment, test print a label, loosen the set screw, slightly move the adjustment plate to the right or
left as deemed necessary to align the print head with the roller, and reprint a label. Repeat the process until proper
printing is achieved and then retighten the set screw while holding the adjustment plate in position.
CAUTION: THE PURPLE KNOB HASN'T ANYTHING TO DO WITH PRINT HEAD
ALIGNMENT. PULLING ON THIS KNOB WILL RELEASE THE PRINT HEAD.
Lt408 Operator Manual
Unit 6: Maintenance
Print Head Latch
Set Screw
Adjustment Plate
Figure 6-4, Print Head Alignment
6-5

Print Head

PN: 9001152A