Test Print Mode - SATO LT408 Operator's Manual

TEST PRINT MODE

Figure 5-16 provides the specific sequence of events required by the operator, the printer, and the printer's
software for a test label to be printed. Test labels are designed to identify failures in configuration, adjustment
problems, and mechanical defects. Use the key on the printer's operator panel to select and enter the required
options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Lt408 Operator Manual
Unit 4: Printer Configuration
FEED + POWER
Printer
beeps
TEST PRINT MODE
TEST PRINT MODE
CONFIGURATION
CONFIGURATION
BARCODE
TEST PRINT MODE
Press or
BARCODE
+ ENTER
Scrolls
TEST PRINT MODE
options
HEAD CHECK
TEST PRINT MODE
FONT
TEST PRINT MODE
FACTORY
Figure 4-16, Test Print Mode
TEST PRINT SIZE
TEST PRINT
PRESS ENTER KEY
TEST PRINT SIZE
LARGE
ENTER
Test Prints
Power off to
cease printing.
4-18
10 mm
SMALL
PN: 9001152A