SATO LT408 Operator's Manual page 64

MENU
RECEIVE BUFFER
MULTI 1 ITEM
BAUDRATE
2400 4800
9600 19200
PARITY BIT
NONE ODD EVEN
STOP BIT
1BIT 2BIT
CHARACTER BIT
7BIT 8BIT
BAUDRATE
2400 4800
9600 19200
38400 57600
PROTOCOL
STATUS5
READY/BUSY
XON/OFF
STATUS3
STATUS4
IGNORE CAN/DLE
YES NO
Lt408 Operator Manual
Unit 4: Printer Configuration
SERIAL INTERFACE MODE (TABLE 4-4)
Allows the selection of the receive buffer type. Select MULTI for multi-item buffer and
1ITEM for a single item buffer.
Allows selection of the baud rate. Will only appear when the RS232C interface is
installed and the LCD option is chosen from the prior menu.
Allows setting of the parity bit for the serial interface. Will not display if the dipswitch
priority option is chosen. The interface board must be installed.
Allows stop bit selection for the serial interface. Will not display if the dipswitch priority
option is chosen.
Allows selection of the data length for serial interface. Will not display if the dipswitch
priority option is chosen.
Allows selection of the baud rate. Will only appear when the RS422 or RS485 interface
is installed and the LCD option is chosen from the prior menu.
Allows setting of communication protocol.
Allows 1-byte command such as CAN and DLE code to be deleted. Will only appear
when the communication protocol is STATUS4 (for overseas specifications).
4-26
DESCRIPTION
PN: 9001152A