Custom Protocol Command Codes Download - SATO CX400 Programming Reference Manual

Section 5. Configuration Commands
Custom Protocol Command Codes
COMMAND STRUCTURE
COMMAND FUNCTION
PRINTER INPUT
PRINTER OUTPUT
Page 5-4
Download
<ESC>LD,a,b,c,d,e,f,g,h,i
a = Replacement character for STX
b = Replacement character for ETX
c = Replacement character for ESC
d = Replacement character for ENQ
e = Replacement character for CAN
f = Replacement character for NUL
g = Replacement character for OFFLINE
jj = Hexadecimal code for Eurocharacter
Example: <ESC>LD,{,},%,#,&,*,~
Placement: Immediately following the <ESC>A Start command and
in an independent data stream.
Default: Standard Protocol command Codes
Allows the user to defines custom Protocol Command codes.
<ESC>A
<ESC>LD,{,},%,#,&,*,~
<ESC>Z
A Protocol Command code status label will be printed as a result of the a
successful download of a custom set of Protocol Command codes.
PN 9001106 Rev. A SATO CX400