•
Adjusting the lumbar support* in the front
seat (p. 186)
•
Adjusting the passenger seat from the driv-
er's seat* (p. 187)
Using stored memory in a powered
front seat
The memory function stores settings for the seat,
door mirrors, and head-up display*.
Using a stored setting
A stored setting can be used with the front door
either open or closed:
Open front door
–
Press one of the memory buttons 1 - 3 with
a brief touch. Seat, door mirrors and head-up
display move and then stop at the positions
stored in the selected memory button.
Closed front door
–
Hold one of the memory buttons 1 - 3
depressed until seat, door mirrors and head-
up display stop in the positions that are
stored in the selected memory button.
If the memory button is released, the movement
of the seat, door mirrors and head-up display will
be stopped.
SEATS AND STEERING WHEEL
WARNING
•
Because the driver's seat can be adjusted
with the ignition off, children should never
be left unattended in the vehicle.
•
Movement of the seat can be STOPPED
at any time by pressing any button on the
power seat control panel.
•
Do not adjust the seat while driving.
•
Make sure there is nothing under the
seats when they are being adjusted.
Related information
•
Manual front seat (p. 180)
•
Power front seat* (p. 181)
•
Adjusting the power front seat* (p. 181)
•
Storing memory function in power operated
front seat* (p. 182)
•
Adjusting massage settings* in the front seat
(p. 184)
•
Adjusting the length of the seat cushion in
the front seat (p. 185)
•
Massage settings in the front seat* (p. 184)
•
Adjusting the side support* in the front seat
(p. 186)
•
Adjusting the lumbar support* in the front
seat (p. 186)
•
Adjusting the passenger seat from the driv-
er's seat* (p. 187)
183
* Option/accessory.