Volvo XC90 TWIN ENGINE Owner's Manual page 156

LIGHTING
Using direction indicators
The car's direction indicators are operated with
the left-hand stalk switch. The direction indicator
lamps flash three times or continuously, depend-
ing on how far up or down the stalk switch is
moved.
Direction indicators.
Short flash sequence
Move the stalk switch up or down to the first
position and release. The direction indicator
lamps flash three times. The function can be
activated/deactivated via the centre display.
LED (Light Emitting Diode)
5
154
NOTE
•
This automatic flashing sequence can be
stopped by moving the stalk switch
immediately in the opposite direction.
•
If the symbol for direction indicators in
the driver display flashes more quickly
than normal - see the message in the
driver display.
Continuous flash sequence
Move the stalk switch up or down to its end
position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Related information
•
Hazard warning flashers (p. 156)
•
Adjusting light functions via the centre dis-
play (p. 149)
Active bending lights*
Active bending lights are designed to provide
maximum illumination in bends and junctions.
5
Cars with LED headlamps* can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
Active bending lights follow steering wheel move-
ments to provide maximum illumination in bends
and junctions and can thereby provide the driver
with improved visibility.
The function is activated automatically when the
car is started. In the event of a fault in the func-
tion, the symbol illuminates in the driver
display at the same time as the driver display
shows an explanatory text.
* Option/accessory.