Volvo XC90 TWIN ENGINE Owner's Manual page 176

WINDOWS, GLASS AND MIRRORS
•
Heated windscreen wiper nozzles* (p. 174)
•
Using the rain sensor's memory function
(p. 175)
•
Using the rear window wiper and washer
(p. 177)
•
Filling washer fluid (p. 647)
•
Wiper blades in service position (p. 646)
•
Replacing windscreen wiper blades (p. 645)
•
Replacing the wiper blade, rear window
(p. 644)
174
Heated windscreen wiper nozzles*
The washer nozzles are heated automatically in
cold weather to prevent the washer fluid from
freezing.
Related information
•
Using the rain sensor (p. 174)
•
Using windscreen and headlamp washers
(p. 176)
•
Using automatic rear windscreen wiping
when reversing (p. 178)
•
Using the rain sensor's memory function
(p. 175)
•
Using the rear window wiper and washer
(p. 177)
•
Filling washer fluid (p. 647)
•
Wiper blades in service position (p. 646)
•
Replacing windscreen wiper blades (p. 645)
•
Replacing the wiper blade, rear window
(p. 644)
•
Using windscreen wipers (p. 173)
Using the rain sensor
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen. Rain sensor sensitiv-
ity can be adjusted with the thumbwheel on the
right-hand stalk switch.
Right-hand stalk switch.
Rain sensor button
Thumbwheel sensitivity/frequency
When the rain sensor is activated, the rain sensor
symbol is shown in the driver display.
Activating the rain sensor
When activating the rain sensor, the car must be
running or the electrical system in ignition posi-
tion I or II while the windscreen wiper stalk
switch must be in position 0 or in the position for
a single sweep.
* Option/accessory.