Using A Stored Position For Seat; Door Mirrors And Head-Up Display - Volvo XC90 TWIN ENGINE Owner's Manual

Storing a position
1. Adjust seat, door mirrors and head-up dis-
play to the desired position.
2. Press and hold the M button depressed.
The light indicator in the button illumi-
nates.
3. Within three seconds, press and hold the
1, 2 or 3 button.
> When the position has been stored in
the selected memory button, an acous-
tic signal can be heard and the light
indicator in the M button extinguishes.
If none of the memory buttons is depressed
within three seconds then the M button extin-
guishes and no storing takes place.
The seat, the door mirrors or the head-up-dis-
play must be readjusted before a new memory
can be set.
Related information
Manual front seat (p. 192)
•
Power* front seat (p. 193)
•
Adjusting the power* front seat (p. 193)
•
Using a stored position for seat, door mir-
•
rors and head-up display* (p. 195)
Adjusting massage settings* in the front
•
seat (p. 197)
Adjusting* the length of the seat cushion
•
in the front seat (p. 198)
Massage settings* in the front seat
•
(p. 196)
Adjusting the side support* in the front
•
seat (p. 199)
Adjusting the lumbar support* in the front
•
seat (p. 200)
Adjusting the passenger seat from the
•
driver's seat* (p. 201)
Angling the door mirrors (p. 179)
•
Settings for head-up display* (p. 150)
•
SEATS AND STEERING WHEEL

Using a stored position for seat,

door mirrors and head-up display*

If the positions for the power* seat, the door
mirrors and the head-up display* have been
stored, they can be activated by using the
memory buttons.
Using a stored setting
A stored setting can be used with the front
door either open or closed:
Open front door
Press one of the memory buttons 1 - 3
–
with a brief touch. Power seat, door mir-
rors and head-up display move and then
stop at the positions stored in the selected
memory button.
* Option/accessory.
}}
195