Volvo XC90 TWIN ENGINE Owner's Manual page 293

•
Reactivating Cruise Control from standby
mode (p. 293)
•
Deactivating Cruise Control (p. 294)
Cruise Control
28
Activating and starting Cruise
Control
28
The cruise control function (CC
selected and activated in order to be able to reg-
ulate the speed.
NOTE: The illustration is schematic - details may vary
depending on car model.
Set cruise control in standby mode
To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function (4).
> The symbol is shown and the cruise con-
trol can then be activated.
Activating/starting cruise control
In order to start the Cruise control from the
standby mode, the car's current speed must be
) must first be
30 km/h (20 mph) or higher. The lowest speed
that can be stored is 30 km/h (20 mph).
To start the cruise control:
–
With the symbol/function
press the steering wheel button
> Cruise Control starts and the current
speed becomes the stored speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h (20 mph).
Related information
•
Cruise Control (p. 290)
DRIVER SUPPORT
displayed,
(2).
291