Volvo XC90 TWIN ENGINE Owner's Manual page 528

SOUND, MEDIA AND INTERNET
•
Connecting a phone to the car via Bluetooth
automatically (p. 528)
•
Connecting a phone to the car via Bluetooth
manually (p. 528)
•
Disconnecting a Bluetooth-connected phone
(p. 529)
•
Switch between Bluetooth-connected
phones (p. 529)
•
Removing a Bluetooth-connected phone
(p. 530)
•
Settings for phone (p. 533)
•
Voice recognition (p. 141)
•
Handling the application menu in the driver
display (p. 101)
•
Audio settings (p. 500)
•
Connecting the car to the Internet via a
mobile device (Bluetooth) (p. 535)
526
Connecting a phone to the car via
Bluetooth for the first time
Connect a phone with Bluetooth activated to
then be able to make calls from the car, send/
receive messages, play back media wirelessly
and connect the car to the Internet.
It is possible to have two Bluetooth devices con-
nected at once, in which case one of them can
only play back wirelessly. The most recently con-
nected phone will automatically be connected to
make calls, send/receive messages, play back
media and provide an Internet connection. It is
possible to change the use of the phone in the
settings for Bluetooth Devices .
After the device has been connected/registered
a first time via Bluetooth, it no longer needs to be
visible/discoverable, but only have Bluetooth acti-
vated. To connect the car to the Internet via a
phone, tethering must also be activated on the
phone. A maximum of 20 connected Bluetooth
devices can be stored in the car.
There are two options for connecting. Either
search the phone from the car or search the car
from the phone.
Option 1 - search phone from car
1. Make the phone searchable/visible via
Bluetooth.
2. To connect the car to the Internet via the
phone's Bluetooth, activate tethering (porta-
ble/personal hotspot) via Bluetooth on the
phone.
3. Open the tile for the phone.
•
If there is no phone connected to the car,
tap on Add phone .
•
If there is a phone connected to the car,
tap on Change . In the pop-up win-
Add phone
dow, tap on .
> Available Bluetooth devices are listed. The
list is updated as new devices are
detected.
4. Tap on the name of the phone to be con-
nected.
5. Check that the specified number code in the
car matches that in the phone. In which case,
choose to accept in both places.
6. On the phone, choose to accept or reject any
options for phone contacts and messages.
NOTE
•
The message function must be activated
in certain phones.
•
Not all mobile phones are fully compati-
ble and may therefore not show contacts
and messages in the car.