Volvo XC90 TWIN ENGINE Owner's Manual page 425

IMPORTANT
•
Check that the 230 V socket (alternating
current) has adequate power capacity for
charging electric vehicles - in the event of
uncertainty, the socket must be checked
by a qualified professional.
•
If the socket has unknown power
capacity - use the lowest level on the
control unit.
Take the charging cable out from the storage
compartment under the cargo area floor. Note
that the car must be switched off prior to charg-
ing.
Connect the charging cable to a 230 V
socket. Never use an extension cable.
2. Set the correct charging current (for existing
230 V socket) on the control unit.
Open the charging hatch and undo the
charging input socket cover. Remove the
charging handle's protective cover and then
press the handle the whole way into the
socket for the car.
HYBRID INFORMATION
Clamp the charging handle's cover in place
as illustrated.
IMPORTANT
To avoid damage to the paint, e.g. in the event
of high winds, position the charging handle's
protective cover so that it does not touch the
car.
}}
423