Table of Contents
Advertisement
VANTAGE 549
naMeplates / warninG Decals Maintenance
Whenever routine maintenance is performed on this machine - or
at least yearly - inspect all nameplates and labels for legibility.
Replace those which are no longer clear. Refer to the parts list for
the replacement item number.
welDer / Generator Maintenance
STORAGE
CLEANING
Store the VANTAGE® 549 in a clean, dry protected areas.
Blow out the generator and controls periodically with low pressure
BRUSH REMOVAL AND REPLACEMENT
air. do this at least once a week in particularly dirty areas.
It is normal for the brushes and slip rings to wear and darken
slightly. Inspect the brushes when a generator overhaul is
necessary.
WARNING
Do not attempt to polish slip rings while the engine is
running.
D-4
MAINTENANCE
Advertisement
Table of Contents
