Table of Contents
Advertisement
VANTAGE 549
General Description
The VANTAGE® 549 is a diesel engine-driven welding power
source. The machine uses a brush type alternating current
generator for DC multi-purpose welding, for 120/240 VAC single
phase and 240V three phase auxiliary standby power. The welding
control system uses state of the art Chopper Technology™.
technical specifications
INPUT - DIESEL ENGINE
Speed (RPM)
High Idle 1800
Low Idle 1525
Full Load
Starting System
12VDC battery and Starter
with Automatic Glow Plugs
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle
Welding Output
100%
525 Amps
(DC multi-purpose)
575 Amps
60%
(DC multi-purpose)
Description
4 cylinder 49.4HP (37 kw)
Turbo Charged Water Cooled
Diesel Engine
Displacement
178 cu. in. (2.9L)
Bore x Stroke
3.62" x 4.33"
92mm x 110mm
Capacities
Fuel 25 US gal (94.6L)
Oil: 2.25 US gal. (8.5L)
Volts at Rated Amps
41 Volts
38 volts
OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
30 - 575 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1800 RPM
Auxiliary Power
11,000 WATTS, 60 Hz., Single Phase
19,000 WATTS, 60 Hz., Three Phase
PHYSICAL DIMENSIONS
Height
(2)
Width
(3)
Depth
Weight
(1) Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When
welding, available auxiliary power will be reduced.
(2) Top of Enclosure. Add 16.8" (427mm) for exhaust and air cleaner.
(3) Includes Door. Base is 31.6"(803mm) wide.
A-1
INSTALLATION
Welding Range
(1)
120/240 VAC
42.0 in (1066.8 mm)
32.9 in. (835.7mm)
69.0 in. (1753mm)
1662lbs. (753kg) (Approx.)
Advertisement
Table of Contents
