Table of Contents
Advertisement
VANTAGE 549
OPTIONAL FIELD
INSTALLED ACCESSORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20
amps each and one dual voltage, full KVA plug rated at 120/240V,
50 amps. 120V plug may not be compatible with NEMA common
household receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL -
Portable control provides same dial range as the output control on
the welder from a location up to the specified length from the
welder. Has convenient plug for easy connection to the welder.
The VANTAGE® 549 is equipped with a 12-pin connector for
connecting the remote control and 12-pin to 6-pin adapter.
K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable
and 30ft. (9m) of work cable, headshield, Filter plate, work clamp
and electrode holder. Cable is rated at 500 amps, 60% duty cycle.
K2641-2 Four Wheeled Steerable Yard Trailer
For in plant and yard towing. Comes standard with a Duo-Hitch™,
a 2" Ball and Lunette Eye combination hitch.
MEDIUM WELDER TRAILER - For heavy-duty road, off-road, plant
and yard use. Includes pivoting jack stand, safety chains, and 13
in. (330 mm) wheels. Stiff .120 in. (3.0 mm) welded rectangular
steel tube frame construction is phosphate etched and powder
coat painted for superior rust and corrosion resistance. Low sway
suspension gives outstanding stability with manageable tongue
weight. Wheel bearings are packed with high viscosity, high
pressure, low washout Lubriplate® grease. Includes a Duo-
Hitch® – a 2 in. (51 mm) Ball/Lunette Eye combination hitch.
Overall width 60 in. (1524 mm). Overall length 124 in. (3150 mm).
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
POLARITY/MULTI-PROCESS SWITCH - For easy polarity switching.
Example: DC-stick root pass on pipe and DC+ stick for hot, fill and
cap passes. Also for an easy process change. Example: DC+ stick
root pass on pipe and DC- Innershield® self-shielded flux-cored
wire for hot, fill and cap passes. 6 and 14-pin remote connections
can be made to this unit. For all Lincoln Electric Chopper
Technology® engine-driven welders. Mounts on roof with K2663-
1 Docking Kit.
K2642-1
K1816-1 Full KVA Adapter Kit - Plugs into the 120/240V NEMA
14-50R receptacle on the case front (which accepts 4-prong
plugs) and converts it to a NEMA 6-50R receptacle (which accepts
3-prong plugs) for connection to Lincoln Equipment with a NEMA
6-50P plug,
T12153-9 Full-KVA Power Plug - One dual voltage plug rated at
120/240V, 50 amps, single phase.
REMOTE OUTPUT CONTROL WITH 120V AC RECEPTACLES Remote
weld output control box with two 120V AC receptacles having GFCI
(Ground Fault Circuit Interrupter) protection. One cord for both
remote and power. 100 ft. (30.5 m) length. Permits remote
adjustment of weld output and power for tools (such as a grinder)
at the work. 20 amp capacity.
K2627-2
DOCKING KIT - Secures the K2642-1 Polarity/Multi- Process
Switch to the engine-driven welder roof. Release latch permits
removal of K2642-1 Polarity/Multi- Process Switch. Made from
stainless steel for rust-free operation. For all Lincoln Electric
Chopper Technology® engine-driven welders.
K2663-1
tiG options
K1783-9 PTA-26V TIG Torch - Air Cooled 200 amp torch (2 piece)
equipped with valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch - Magnum Parts
Kit provides all the torch accessories you need to start welding.
Parts kit provides collets, collet bodies, a black cap, alumina
nozzles and tungstens in a variety of sizes, all packaged in an
easy to carry reclosable sack.
K870 Foot Amptrol®- Varies current while welding for making
critical TIG welds and crater filling. Depress pedal to increase
current. Depressing pedal fully achieves maximum set current.
Fully raising the pedal finishes the weld and starts the after flow
cycle on systems so equipped. Includes 25 ft. (7.6m) control
cable.
K963-3 Hand Amptrol®- Provides 25 ft. (7.6 m) of remote current
control for TIG welding. (6-pin plug connection). Velcro straps
secure torch. (one size fits all Pro-Torch™ TIG Torches)
Square Wave™ TIG 175 - For AC TIG Welding with square wave
performance, use the AC generator of the engine-driven welder to
supply the power (full rated output may not be available). Easy
setup. Includes torch, foot Amptrol™ and gas regulator and hose.
Requires the K1816-1 Full KVA Adapter Kit.
K1478-5
K2350-2 Invertec®V205-T AC/DC One-Pak™ Package - For AC
TIG welding with square wave performance, use the AC generator
of the engine-driven welder to supply the power. Easy setup.
Includes torch, parts kit, regulator and hose kit, Twist-Mate™
torch adapter, work cable with Twist-Mate end and foot
Amptrol®.
C-1
ACCESSORIES
Advertisement
Table of Contents
