KTM 790 Adventure R Rally 2020 Owner's Manual page 93

–
The combination instrument starts searching for a suitable
headset. If the search was successful, the name of the head-
set is displayed in the Pairing submenu. Press the SET button
to select the device. Press the SET button again to confirm
the Confirm submenu item. The pairing of a headset with the
combination instrument is now completed at this point.
Info
The headset must be in pairing mode for the headset
to be found by the combination instrument. Follow the
instructions in the Owner's Manual of the headset.
Once the pairing is completed, the name of the paired
headset is displayed in the Headset submenu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
Not every headset is suitable for pairing with the com-
bination instrument.
–
Move the previously paired device into the range of the combi-
nation instrument while the Bluetooth
The device is automatically paired with the combination
instrument.
COMBINATION INSTRUMENT 7
® function is active.
91