15 WHEELS, TIRES
270
–
Position both brake calipers.
The brake linings are correctly positioned.
–
Mount screws
Guideline
Screw, front
brake caliper
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pres-
sure point. Secure the hand brake lever in the activated
position.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front
brake caliper
–
Position wheel speed sensor
–
Mount and tighten screw
A00667-11
Guideline
Screw, front wheel
speed sensor
–
Remove the locking piece of the hand brake lever.
–
Take the motorcycle off the front lifting gear. (
5
on both sides but do not tighten yet.
M10x1.25
45 Nm (33.2 lbf ft)
5
on both sides.
M10x1.25
45 Nm (33.2 lbf ft)
6
in the hole.
7
.
M6
10 Nm (7.4 lbf ft)
Loctite
®
243™
Loctite
®
243™
p. 190)