KTM 790 Adventure R Rally 2020 Owner's Manual page 224

13 SERVICE WORK ON THE CHASSIS
13.26
222
Cleaning the dust boots of the fork legs
F02053-10
Guideline
Screw, fork protector
Screw, fork protector
–
Repeat these steps on the opposite side.
Preparatory work
–
Raise motorcycle with rear lifting gear. (
–
Remove the front fender. (
–
Lift the motorcycle with the front lifting gear. (
Main work
(All standard models)
–
1
Push dust boots of both fork legs downward.
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
M5x12 5 Nm (3.7 lbf ft)
M5x17 5 Nm (3.7 lbf ft)
p. 188)
p. 219)
p. 189)