Stereo Pitch Shifter Delay - Roland VS-2480 Supplementary Manual

Algorithm List

Stereo Pitch Shifter Delay

Changes the pitch of the direct sound. Corrects vocals out of tune or adds thickness to the sound by mixing the
direct sound and a sound at a shifted pitch.
fig.08-12
Input L
Input R
Setting up pitch
Chromatic Pitch (Chromatic) is used for major pitch variation while Fine Pitch (Fine) is used for fine adjustment.
Setting up slightly different pitches for the right and left gives thickness to the sound.
Parameter (full name)
PShift (Pitch Shifter Delay) : Shifts the pitch.
Sw (Switch)
Lch Chroma Pitch (Lch Chromatic Pitch)
Rch Chroma Pitch (Rch Chromatic Pitch)
Lch Fine Pitch
Rch Fine Pitch
Lch PreDly (Lch Pre-Delay)
Rch PreDly (Rch Pre-Delay)
Lch FBDly (Lch Feedback Delay Time)
Rch FBDly (Rch Feedback Delay Time)
Lch FeedbackLvl (Lch Feedback Level)
Rch FeedbackLvl (Rch Feedback Level)
Lch CrossFeedbackLvl (Lch Cross-Feedback Level)-100–100
Rch CrossFeedbackLvl (Rch Cross-Feedback Level)-100–100
FX Lvl (Effect Level)
DirLvl (Direct Level)
42
Direct Level
Pitch Shifter L
Delay L
Delay R
Pitch Shifter R
Direct Level
Setting Function
On, Off Turns the pitch shifter on or off.
-12–12 Sets the left-side pitch variation (by semitone).
-12–12 Sets the right-side pitch variation (by semitone).
-100–100 Sets the left-side pitch variation (by cent).
-100–100 Sets the right-side pitch variation (by cent).
0–50 ms Sets the time from when the direct sound is output until
when the left-side sound at a shifted pitch is output.
0–50 ms Sets the time from when the direct sound is output until
when the right-side sound at a shifted pitch is output.
0–500 ms Sets the feedback repetition cycle for the left-side delay
sound.
0–500 ms Sets the feedback repetition cycle for the right-side delay sound.
-100–100 Sets the amount of the left-side sound at a shifted pitch
should be returned to the left pitch shifter input.
-100–100 Sets the amount of the right-side sound at a shifted pitch
should be returned to the right-side pitch shifter input.
Sets the amount of the left-side sound at a shifter pitch
should be returned to the right-side pitch shifter input.
Sets the amount of the right-side sound at a shifted pith
should be returned to the left-side pitch shifter input.
-100–100 Sets the volume of the sound at a shifter pitch.
-100–100 Sets the volume of the direct sound.
Output L
3BAND EQ
3BAND EQ
Output R