Click Noise And Percussion Settings - Roland VK-8M Owner's Manual

■ Click Noise and Percussion
Settings
1.
Hold down the [BANK] buttons and press the
PERCUSSION [2ND/3RD] button.
The indicators of [1]–[2] buttons ([1]–[6] buttons) will
blink.
2.
Press one of the [1]–[2] buttons ([1]-[6] buttons) to select
the parameter that you want to edit.
There are eight parameters related to Click Noise and
Percussion.
Pressing the [H-BAR PART] button causes the button's
color to change and allows you to select all parameters.
The following parameters are assigned to each button.
The [H-BAR PART] button lights up in red.
Button Parameter
[1] ON CLICK LEVEL
[2] OFF CLICK LEVEL
The [H-BAR PART] button lights up in green.
Button Parameter
[1] PERCUSSION SOFT LEVEL
[2] PERCUSSION NORMAL LEVEL
[3] PERCUSSION SLOW TIME
[4] PERCUSSION FAST TIME
[5] PERCUSSION RECHARGE TIME
[6] PERCUSSION H-BAR LEVEL
3.
Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [ON] button,
the setting will return to its initial value.
4.
When setting another parameter, press an [H-BAR
PART] button and [1]–[2] buttons ([1]–[6] buttons) to
select the parameter, then turn the [VIBRATO AND
CHORUS] knob to change the setting.
When you want to stop editing, press the [BANK]
button.
5.
Press the [WRITE] button to finalize the settings of the
click noise and percussion parameters.
Parameter settings will be saved.
While the parameters are being saved, the [1]–[2] buttons
([1]-[6] buttons) will blink.
NOTE
Never turn off the power while parameters are being saved.
❍ ON CLICK LEVEL (0–31)
Specifies the level of the click sound that occurs when a
key is pressed (On). Increasing this value will increase the
volume.
❍ OFF CLICK LEVEL (0–31)
Specifies the level of the click sound that occurs when a
key is released (Off). Increasing this value will increase the
Page
volume.
p. 43
❍ PERCUSSION SOFT LEVEL (0–15)
p. 43
Sets the percussion volume when percussion is set to Soft
(the [SOFT] button's indicator is lit). Increasing this value
will increase the volume of percussion.
Page
❍ PERCUSSION NORMAL LEVEL (0–15)
p. 43 Sets the percussion volume when percussion is set to
Normal (the [SOFT] button's indicator is dark). Increasing
p. 43
this value will increase the volume of percussion.
p. 43
❍ PERCUSSION SLOW TIME (0–127)
p. 43
Sets the speed at which the percussion sound will decay
p. 44
when percussion is set to Slow (the [SLOW] button's
indicator is lit). Increasing this value causes the percussion
p. 44
to decay more slowly.
❍ PERCUSSION FAST TIME (0–127)
Sets the speed at which the percussion sound will decay
when percussion is set to Fast (the [SLOW] button's
indicator is dark). Increasing this value causes the
percussion to decay more slowly.
Advanced Use
43