Connecting Your Amp, Speakers, or Headphones
The VK-8M is not equipped with an amplifier or speakers. In order to hear the
sound, you will need to connect audio equipment such as a monitor speaker system
or stereo set, or use headphones.
1
Before making any connections, make sure that all the devices are turned
off.
2
Connect the VK-8M to your amp/speaker system and headphones as
shown in the diagram.
fig.01-02
Mixer
Powered Amplifier
Use audio cables to connect audio equipment, such as an amp or speakers. If you are
using headphones, plug them into the PHONES jack.
Headphones
Audio
cable
Monitor
Speaker
Audio Set
Before You Begin Playing
NOTE
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
In order to take full advantage
of the VK-8M's performance,
we recommend using a stereo
amp/speaker system. If you
are using a mono system,
make the connections to the
OUTPUT L (MONO) jack.
Audio cables and headphones
are not included. You will
need to provide these
separately.
15