Restoring The Factory Settings (Factory Reset) - Roland VK-8M Owner's Manual

Restoring the Factory Settings
(Factory Reset)
This function resets all the VK-8M's settings to their factory default values.
1
Make sure that the volume is turned to the minimum position.
2
Press the VK-8M's [POWER] switch to turn off the power.
fig.01-07
3
While holding down the [BANK] button, [WRITE] button and [H-BAR
MANUAL] button, press the [POWER] switch to turn on the power.
4
Press the [BANK] button, [WRITE] button and [H-BAR MANUAL]
button until all of the panel indicators light.
All settings will be restored to what they were when the instrument first left the
factory.
Once the Factory Reset has been completed, all panel indicators will light for several
seconds.
fig.01-07
Upper position
OFF
Before You Begin Playing
NOTE
When you perform the Factory
Reset operation, all the data
you created will be lost from
the VK-8M's internal memory.
If the VK-8M contains
important data that you wish
to keep, use the Bulk Dump
operation to save the data on
an external MIDI sequencer
before you perform the Factory
Reset operation (p. 51).
NOTE
Never turn off the power
while Factory Reset is being
performed.
17