Adding Ambience (Reverb) - Roland VK-8M Owner's Manual

Playing the Organ

Adding Ambience (Reverb)

Reverb is an effect that adds reverberation to the sound.
fig.01-33
2
1
Turn the REVERB [LEVEL] knob to adjust the amount of reverb effect to
be applied.
Rotate fully right: Maximum reverberation.
Rotate fully left: No effect.
Changing the Reverb Type
By changing the reverberations of the notes, you can enjoy the atmosphere of
performance in a wide variety of different locations.
2
Press the [REVERB] button to switch the reverb types.
The reverb type will be switched each time you press the [REVERB] button.
Type
ROOM
HALL
CHURCH
SPRING
34
1
Explanation
Simulates the reverberation of a room.
Simulates the reverb of a large concert hall.
Simulates the reverberation of a church.
Simulates the reverberation of a spring reverb unit (p. 32).
NOTE
When the "SPRING SHOCK"
function is assigned to the D
Beam controller, please be
aware that raising the reverb
level excessively will produce
a high-volume impact sound
(p. 31).
If the "SPRING SHOCK"
function is assigned to the D
Beam controller, be aware that
excessively high reverb level
settings will produce a high-
volume impact sound. To
decrease the volume of the
impact sound, use the REVERB
[LEVEL] knob to adjust the
reverb level (p. 31).