Table of Contents
Advertisement
About the Procedures
In general, the operating procedures introduced in p. 16–25 involve proceeding through the steps
below.
1
2
Select the input connectors (video/audio)
See "Selecting the video input connector" (p. 28), "Selecting the audio input connector" (p. 29).
3
Select the output format (video only)
Output of the audio/video in the selected format begins from the appropriate output connectors.
Process for up-conversion, down-conversion, and frame rate conversion are automatically set with
Video Output
COMPONENT
DVI-I
OUTPUT
OUTPUT
Connect the devices
See "Selecting the video output format" (p. 29).
the settings for step 2 and step 3.
i.LINK
HD-SDI
OUTPUT
OUT
See "Rear Panel" (p. 12).
Audio Output
AUDIO OUTPUT
CH1/2, CH3/4
Connecting
Frame Rate
This index indicates the
number of times (number of
frames) that a screen can be
redrawn per second.
For example, a value of 1080/
59.94i means that the screen
is redrawn 59.94 times per
second.
15
Advertisement
Table of Contents
