Table of Contents
Advertisement
Basic Operations
Audio Delay
Displays the amount of audio delay in units of frames. The value in ()
displays the audio delay in milliseconds.
* Set audio delay using the procedure in "Setting internal
processing" (p. 30).
Timecode / User Bit
Displays the time code and user bit output from the i.LINK connector
and HD-SDI OUT connector.
a
b
a
Displays the timecode.
* If the frame rate of the input video (p. 28) and the output format (p.
29) are different, the displayed timecode is generated internally.
b
Displays the user bit (p. 39).
c
Displays drop frame (D) or non-drop frame (ND).
32
c
Menu Display and Operation
The Menu screen is shown on the display when the MENU button is
pressed. Various settings for the VC-300HD/
VC-200HD are performed on the Menu screen.
1
2
3
* See "Menus and settings" (p. 36) for items displayed on the Menu
screen.
Item Selection
When the VALUE/ENTER knob is turned while an item number is
blinking, the item number and item name shown on the display
changes.
Press the PAGE button to skip groups of item numbers. Press and hold
down the PAGE button to display the name of the group being skipped.
The following are the groups.
Name Range of
Group Name
Item Numberson
100 – 170
Input Parameter
200 – 275
Processing Parameter
300 – 391
Output Parameter
400 – 460
SDI Parameter
900 – 999
System Parameter
MENU button
1 Item Number
2 Item Name
3 Value of Setting
Descriptions
p. 36
p. 37
p. 39
p. 41
p. 41
Advertisement
Table of Contents
