Miscellaneous
The SDI signal cannot be captured with non-linear software
(VC-300HD only)
● Is the time code being output?
➔
Some non-linear software will terminate capture if the time code
is lost. Set "270: TC Generate" of the Menu (p. 32) to output the
time code.
If a signal with embedded time code, such as an SDI signal, is
set in the input when using VC-300HD, set to "Thru" or "Offset."
When using the VC-200HD or when setting a signal that does
not have embedded time code, such as a composite signal or a
DVI-I signal, with the VC-300HD, set to "Free Run."
Troubleshooting
45