Roland RG-7 Midi Implementation Manual page 5

Byte Explanation
F0H Exclusive status
7EH ID number (Universal Non-realtime Message)
7FH Device ID (Broadcast)
09H Sub ID#1 (General MIDI Message)
01H Sub ID#2 (General MIDI 1 On)
F7H EOX (End Of Exclusive)
* When this message is received, Rx.BANK SELECT will be OFF and Rx.NRPN will be
OFF.
* There must be an interval of at least 50 ms between this message and the next.
❍ GM2 System On
This is a command message that resets the internal settings of the unit to the General MIDI
initial state (General MIDI System-Level 2). After receiving this message, this instrument
will automatically be set to the proper condition for correctly playing a GM2 score.
Status Data byte
F0H 7EH 7FH 09H 03H
Byte Explanation
F0H Exclusive status
7EH ID number (Universal Non-realtime Message)
7FH Device ID (Broadcast)
09H Sub ID#1 (General MIDI Message)
03H Sub ID#2 (General MIDI 2 On)
F7H EOX (End Of Exclusive)
* When this message is received, this instrument will be able to receive the messages
specified by General MIDI 2, and use the General MIDI 2 soundmap.
* There must be an interval of at least 50 ms between this message and the next.
❍ GM System Off
"GM System Off" is a command message that resets the internal state of this instrument
from the GM state to its native condition. This instrument will reset to the GS default state.
Status Data byte
F0H 7EH, 7FH, 09H, 02H
Byte Explanation
F0H Exclusive status
7EH ID number (Universal Non-realtime Message)
7FH Device ID (Broadcast)
09H Sub-ID#1 (General MIDI message)
02H Sub-ID#2 (General MIDI Off)
40H EOX (End of exclusive)
* There must be an interval of at least 50 ms between this message and the next.
❍ GS reset
GS Reset is a command message that resets the internal settings of a device to the GS initial
state. This message will appear at the beginning of GS music data, and a GS device that
receives this message will automatically be set to the proper state to correctly playback GS
music data.
Status Data byte
F0H 41H, 10H, 42H, 12H, 40H, 00H,
7FH, 00H, 41H
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
10H Device ID (dev: 00H-1FH (1-32), Initial value is 10H (17))
42H Model ID (GS)
12H Command ID (DT1)
40H Address MSB
00H Address
7FH Address LSB
00H Data (GS reset)
41H Checksum
F7H EOX (End Of Exclusive)
* When this message is received, Rx.NRPN will be ON.
* There must be an interval of at least 50 ms between this message and the next.
● Universal Realtime System Exclusive Messages
❍ Master volume
Status
F0H
Byte
F0H
7FH
7FH
04H
01H
llH
mmH
F7H
* The lower byte (llH) of Master Volume will be handled as 00H.
Status
F7H
❍ Master Fine Tuning
Status
F0H
Byte
F0H
7FH
7FH
04H
03H
llH
mmH
F7H
mm, ll: 00 00H - 40 00H - 7F 7FH(-100 - 0 - +99.9 [cents])
❍ Master Coarse Tuning
Status
F0H
Status
F7H
Byte
F0H
7FH
7FH
04H
04H
llH
mmH
F7H
llH :
mmH :
● Global Parameter Control
Parameters of the Global Parameter Control are newly provided for the General MIDI 2.
❍ Reverb Parameters
Status
Status
F7H
F0H
Byte
F0H
7FH
7FH
04H
05H
01H
01H
01H
01H
01H
ppH
vvH
F7H
pp=0
MIDI Implementation
Data byte
7FH, 7FH, 04H, 01H, llH, mmH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Device Control messages)
Sub ID#2 (Master Volume)
Master volume lower byte
Master volume upper byte
EOX (End Of Exclusive)
Data byte
7FH, 7FH, 04H, 03H, llH, mmH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Device Control)
Sub ID#2 (Master Fine Tuning)
Master Fine Tuning LSB
Master Fine Tuning MSB
EOX (End Of Exclusive)
Data byte
7FH, 7FH, 04H, 04H, llH, mmH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Device Control)
Sub ID#2 (Master Coarse Tuning)
Master Coarse Tuning LSB
Master Coarse Tuning MSB
EOX (End Of Exclusive)
ignored (processed as 00H)
28H - 40H - 58H (-24 - 0 - +24 [semitones])
Data byte
7FH, 7FH, 04H, 05H, 01H, 01H,
01H, 01H, 01H, ppH, vvH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Device Control)
Sub ID#2 (Global Parameter Control)
Slot path length
Parameter ID width
Value width
Slot path MSB
Slot path LSB (Effect 0101: Reverb)
Parameter to be controlled.
Value for the parameter.
EOX (End Of Exclusive)
Reverb Type
vv = 00H Small Room (Room1)
vv = 01H Medium Room (Room2)
Status
F7H
Status
F7H
Status
F7H
Status
F7H
5