Roland RG-7 Midi Implementation Manual page 28

MIDI Implementation
● 015c: STEREO DELAY2
This is a stereo delay.
No Parameter Value Default
1 Delay Left sync 0 - 1 ms, note
2 Delay Left 0 - 127 1-1300 ms
3 Delay Left 0 - 21 note (*1)
Delay Right
4 0 - 1 ms, note
sync
5 Delay Right 0 - 127 1-1300 ms
6 Delay Right 0 - 21 note (*1)
7 Phase Left 0 - 1
NORMAL,
INVERSE
8 Phase Right 0 - 1
Feedback NORMAL,
9 0 - 1
Mode CROSS
10 Feedback # 49 - 89 0- +80 %
200-8000 Hz,
11 HF Damp 0 - 17
BYPASS
12 Low Gain 0 - 30 -15- +15 dB
13 High Gain 0 - 30 -15- +15 dB
D100:0W-
14 Balance # 0 - 100
D0:100W
15 Level 0 - 127 0-127
● 015d: STEREO DELAY3
This is a stereo delay.
No Parameter Value Default
1 Delay Left sync 0 - 1 ms, note
2 Delay Left 0 - 127 1-1300 ms
3 Delay Left 0 - 21 note (*1)
Delay Right
4 0 - 1 ms, note
sync
5 Delay Right 0 - 127 1-1300 ms
6 Delay Right 0 - 21 note (*1)
7 Phase Left 0 - 1
NORMAL,
INVERSE
8 Phase Right 0 - 1
Feedback NORMAL,
9 0 - 1
Mode CROSS
10 Feedback # 49 - 89 0- +80 %
200-8000 Hz,
11 HF Damp 0 - 17
BYPASS
12 Low Gain 0 - 30 -15- +15 dB
13 High Gain 0 - 30 -15- +15 dB
D100:0W-
14 Balance # 0 - 100
D0:100W
15 Level 0 - 127 0-127
● 015e: STEREO DELAY4
This is a stereo delay.
No Parameter Value Default
1 Delay Left sync 0 - 1 ms, note
2 Delay Left 0 - 127 1-1300 ms
3 Delay Left 0 - 21 note (*1)
Delay Right
4 0 - 1 ms, note
sync
5 Delay Right 0 - 127 1-1300 ms
6 Delay Right 0 - 21 note (*1)
7 Phase Left 0 - 1 NORMAL,
INVERSE
8 Phase Right 0 - 1
28
Description
When this is set to "note," the effect
is synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
When this is set to "note," the effect
is synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
Phase of the delay sound
Selects the way in which delay
sound is fed back into the effect.
(See the figures above.)
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don't want to filter
out any high frequencies, set this
parameter to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
Phase of the delay sound
Selects the way in which delay sound
is fed back into the effect. (See the fig-
ures above.)
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter
to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
Phase of the delay sound
No Parameter Value Default
Feedback NORMAL,
9 0 - 1
Mode CROSS
10 Feedback # 49 - 89 0- +80 %
200-8000 Hz,
11 HF Damp 0 - 17
BYPASS
12 Low Gain 0 - 30 -15- +15 dB
13 High Gain 0 - 30 -15- +15 dB
D100:0W-
14 Balance # 0 - 100
D0:100W
15 Level 0 - 127 0-127
● 015f: STEREO DELAY5
This is a stereo delay.
No Parameter Value Default
1 Delay Left sync 0 - 1 ms, note
2 Delay Left 0 - 127 1-1300 ms
3 Delay Left 0 - 21 note (*1)
Delay Right
4 0 - 1 ms, notße
sync
5 Delay Right 0 - 127 1-1300 ms
6 Delay Right 0 - 21 note (*1)
NORMAL,
7 Phase Left 0 - 1
INVERSE
8 Phase Right 0 - 1
Feedback NORMAL,
9 0 - 1
Mode CROSS
10 Feedback # 49 - 89 0- +80 %
200-8000 Hz,
11 HF Damp 0 - 17
BYPASS
12 Low Gain 0 - 30 -15- +15 dB
13 High Gain 0 - 30 -15- +15 dB
D100:0W-
14 Balance # 0 - 100
D0:100W
15 Level 0 - 127 0-127
● 0150: LONG DELAY
A delay that provides a long delay time.
No Parameter Value Default
1 Delay sync 0 - 1 ms, note
2 Delay Time 0 - 127 1-2600 ms
3 Delay Time # 0 - 21 note (*1)
NORMAL,
4 Phase 0 - 1
INVERSE
5 Feedback 49 - 89 0- +80 %
200-8000 Hz,
6 HF Damp 0 - 17
BYPASS
7 Pan 0 - 127 L64-63R
8 Low Gain 0 - 30 -15- +15 dB
9 High Gain 0 - 30 -15- +15 dB
D100:0W-
10 Balance # 0 - 100
D0:100W
11 Level 0 - 127 0-127
Description
Selects the way in which delay sound
is fed back into the effect. (See the fig-
ures above.)
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter
to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
Phase of the delay sound
Selects the way in which delay sound
is fed back into the effect. (See the fig-
ures above.)
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter
to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Description
When this is set to "note," the effect is
synchronized with the tempo.
Delay time from when the original
sound is heard to when the delay
sound is heard (Hz)
Delay time from when the original
sound is heard to when the delay
sound is heard (note)
Phase of the delay (NORMAL: non-
inverted, INVERSE: inverted)
Proportion of the delay sound that is
to be returned to the input (negative
values invert the phase)
Frequency at which the high-fre-
quency content of the delayed sound
will be cut (BYPASS: no cut)
Panning of the delay sound
Amount of boost/cut for the high-
frequency range
Amount of boost/cut for the high-
frequency range
Volume balance of the original sound
(D) and delay sound (W)
Output volume