Roland RG-7 Midi Implementation Manual page 27

● 0122: ROTARY
The Rotary effect simulates the sound of the rotary speakers often used with the electric
organs of the past. Since the movement of the high range and low range rotors can be set
independently, the unique type of modulation characteristic of these speakers can be
simulated quite closely. This effect is most suitable for electric organ Patches.
No Parameter Value Default
1 Speed # 0 - 1 SLOW, FAST
Woofer Slow
2 1 - 127 0.05-10.00 Hz
Speed
Woofer Fast
3 1 - 127 0.05-10.00 Hz
Speed
Woofer Accel-
4 0 - 15 0-15
eration
5 Woofer Level 0 - 127 0-127
Tweeter Slow
6 1 - 127 0.05-10.00 Hz
Speed
Tweeter Fast
7 1 - 127 0.05-10.00 Hz
Speed
Tweeter
8 0 - 15 0-15
Acceleration
9 Tweeter Level 0 - 127 0-127
10 Separation # 0 - 127 0-127
11 Level 0 - 127 0-127
● 012d: ROTARY2
This type provides modified response for the rotary speaker, with the low end boosted
further.
This effect is a descendant of the Roland VK Series' built-in rotary speaker.
No Parameter Value Default
1 Speed # 0 - 1 SLOW, FAST
2 Brake # 0 - 1 OFF, ON
Woofer Slow
3 1 - 127 0.05-10.00 Hz
Speed
Woofer Fast
4 1 - 127 0.05-10.00 Hz
Speed
Woofer Trans
5 0 - 127 0-127
Up
Woofer Trans
6 0 - 127 0-127
Down
7 Woofer Level 0 - 127 0-127
Tweeter Slow
8 1 - 127 0.05-10.00 Hz
Speed
Tweeter Fast
9 1 - 127 0.05-10.00 Hz
Speed
Tweeter Trans
10 0 - 127 0-127
Up
Tweeter Trans
11 0 - 127 0-127
Down
12 Tweeter Level 0 - 127 0-127
13 Spread 0 - 10 0-10
14 Low Gain 0 - 30 -15- +15 dB
15 High Gain 0 - 30 -15- +15 dB
16 Level 0 - 127 0-127
Description
Simultaneously switch the rotational
speed of the low frequency rotor and
high frequency rotor.
SLOW: Slows down the rotation to
the Slow Rate.
FAST: Speeds up the rotation to the
Fast Rate.
Slow speed (SLOW) of the low fre-
quency rotor
Fast speed (FAST) of the low fre-
quency rotor
Adjusts the time it takes the low fre-
quency rotor to reach the newly se-
lected speed when switching from
fast to slow (or slow to fast) speed.
Lower values will require longer
times.
Volume of the low frequency rotor
Settings of the high frequency rotor
The parameters are the same as for
the low frequency rotor
Spatial dispersion of the sound
Output Level
Description
Rotational speed of the rotating
speaker
Switches the rotation of the rotary
speaker.
When this is turned on, the rotation
will gradually stop. When it is turned
off, the rotation will gradually re-
sume.
Low-speed rotation speed of the
woofer
High-speed rotation speed of the
woofer
Adjusts the rate at which the woofer
rotation speeds up when the rotation
is switched from Slow to Fast.
Adjusts the rate at which the woofer
rotation speeds up when the rotation
is switched from Fast to Slow.
Volume of the woofer
Settings of the tweeter
The parameters are the same as for
the woofer.
Sets the rotary speaker stereo image.
The higher the value set, the wider
the sound is spread out.
Gain of the low range
Gain of the high range
Output Level
● 0300: ROTARY MULTI
This is an effect combining the VK series internal effect with an organ effect with the same
features.
It comprises vibrato/chorus, overdrive, and rotary effects.
No Parameter Value Default
Vib/Cho
1 0 - 1 OFF, ON
Switch
V-1, V-2, V-3,
2 Vib/Cho Type 0 - 5
C-1, C-2, C-3
Vib/Cho
3 0 - 2 '50, '60, '70
Vintage
Vib/Cho
4 0 - 127 0-127
Level
5 OD Switch 0 - 1 OFF, ON
6 OD Drive # 0 - 127 0-127
7 OD Level 0 - 127 0-127
8 Rotary Switch 0 - 1 OFF, ON
9 Rotary Speed # 0 - 1 SLOW, FAST
10 R-Wf Slow Sp 1 - 127 0.05-10.00 Hz
11 R-Wf Fast Sp 1 - 127 0.05-10.00 Hz
12 R-Wf Accel 0 - 15 0-15
13 R-Wf Level 0 - 127 0-127
14 R-Tw Slow Sp 1 - 127 0.05-10.00 Hz
15 R-Tw Fast Sp 1 - 127 0.05-10.00 Hz
16 R-Tw Accel 0 - 15 0-15
17 R-Tw Level 0 - 127 0-127
18 Rotary Separat 0 - 127 0-127
19 Rotary Level 0 - 127 0-127
● 015b: STEREO DELAY1
This is a stereo delay.
No Parameter Value Default
1 Delay Left sync 0 - 1 ms, note
2 Delay Left 0 - 127 1-1300 ms
3 Delay Left 0 - 21 note (*1)
Delay Right
4 0 - 1 ms, note
sync
5 Delay Right 0 - 127 1-1300 ms
6 Delay Right 0 - 21 note (*1)
7 Phase Left 0 - 1
NORMAL,
8 Phase Right 0 - 1 INVERSE
Feedback NORMAL,
9 0 - 1
Mode CROSS
10 Feedback # 49 - 89 0- +80 %
200-8000 Hz,
11 HF Damp 0 - 17
BYPASS
12 Low Gain 0 - 30 -15- +15 dB
13 High Gain 0 - 30 -15- +15 dB
D100:0W-
14 Balance # 0 - 100
D0:100W
15 Level 0 - 127 0-127
MIDI Implementation
Description
Switches the vibrato and chorus ef-
fects
Vibrato and chorus effect types
V-1, V-2, V-3: Adds a wavering (vi-
brato) that is created by changes in
the pitch.The effect deepens as the
value is increased
C-1, C-2, C-3: Adds a fullness and
breadth (chorus) to the sound.The ef-
fect deepens as the value is increased.
This reproduces the subtle differenc-
es in the vibrato and chorus effects in
organs built in different years.
Vibrato/chorus effect volume
Switches the overdrive effect
Amount of distortion
Overdrive effect volume
Switches the rotary effect
Low- and high-frequency rotation
speeds (Rate)
SLOW: (Slow Rate)
FAST: (Fast Rate)
Rate with low-frequency rotor set to
SLOW rate
Rate with low-frequency rotor set to
FAST rate
Speed at which the low-frequency ro-
tor's rotation rate changes when the
rotation speed is switched
Low-frequency rotor volume
High-frequency rotor settingThis pa-
rameter is the same as that for the
low-frequency rotor.
Amount of breadth in the sound
Output volume
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay
sound is heard. (Hz)
Adjusts the time until the delay
sound is heard. (note)
Phase of the delay sound
Selects the way in which delay sound
is fed back into the effect. (See the fig-
ures above.)
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter
to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
27