Roland RG-7 Midi Implementation Manual page 31

● 0204: DISTORTION-->FLANGER
The parameters are essentially the same as in "OVERDRIVE-->FLANGER," with the
exception of the following two.
Overdrive Drive-->Distortion Drive
Overdrive Pan-->Distortion Pan
● 0205: DISTORTION-->DELAY
The parameters are essentially the same as in "OVERDRIVE-->DELAY," with the exception
of the following two.
Overdrive Drive-->Distortion Drive
Overdrive Pan-->Distortion Pan
● 0206: ENHANCER-->CHORUS
This effect connects an enhancer and a chorus in series.
No Parameter Value Default
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
Chorus Pre De-
3 0 - 125 0.0-100.0 ms
lay
Chorus Rate
4 0 - 1 Hz, note
sync
5 Chorus Rate # 1 - 127 0.05-10.00 Hz
6 Chorus Rate 0 - 21 note (*1)
7 Chorus Depth 0 - 127 0-127
Chorus Balance D100:0W-
8 0 - 100
# D0:100W
9 Level 0 - 127 0-127
● 0207: ENHANCER-->FLANGER
This effect connects an enhancer and a flanger in series.
No Parameter Value Default
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
Flanger Pre De-
3 0 - 125 0.0-100.0 ms
lay
Flanger Rate
4 0 - 1 Hz, note
sync
5 Flanger Rate # 1 - 127 0.05-10.00 Hz
6 Flanger Rate 0 - 21 note (*1)
7 Flanger Depth 0 - 127 0-127
Flanger Feed-
8 0 - 98 -98- +98 %
back
Flanger Bal- D100:0W-
9 0 - 100
ance # D0:100W
10 Level 0 - 127 0-127
● 0208: ENHANCER-->DELAY
This effect connects an enhancer and a delay in series.
No Parameter Value Default
Enhancer Sens
1 0 - 127 0-127
#
2 Enhancer Mix 0 - 127 0-127
3 Delay sync 0 - 1 ms, note
4 Delay Time 0 - 127 1-2600 ms
5 Delay Time 0 - 21 note (*1)
Delay Feed-
6 49 - 89 0- +80 %
back
Delay HF 200-8000 Hz,
7 0 - 17
Damp BYPASS
Delay Balance D100:0W-
8 0 - 100
# D0:100W
9 Level 0 - 127 0-127
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from the di-
rect sound until the chorus sound is
heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to BY-
PASS.
Adjusts the volume balance between
the sound that is sent through the de-
lay (W) and the sound that is not sent
through the delay (D).
Output Level
● 0209: CHORUS-->DELAY
This effect connects a chorus and a delay in series.
No Parameter Value Default
Chorus Pre De-
1 0 - 125 0.0-100.0 ms
lay
Chorus Rate
2 0 - 1 Hz, note
sync
3 Chorus Rate 1 - 127 0.05-10.00 Hz
4 Chorus Rate 0 - 21 note (*1)
5 Chorus Depth 0 - 127 0-127
Chorus Balance D100:0W-
6 0 - 100
# D0:100W
7 Delay sync 0 - 1 ms, note
8 Delay Time 0 - 127 1-2600 ms
9 Delay Time 0 - 21 note (*1)
Delay Feed-
10 49 - 89 0- +80 %
back
Delay HF 200-8000 Hz,
11 0 - 17
Damp BYPASS
Delay Balance D100:0W-
12 0 - 100
# D0:100W
13 Level 0 - 127 0-127
● 020a: FLANGER-->DELAY
This effect connects a flanger and a delay in series.
No Parameter Value Default
Flanger Pre De-
1 0 - 125 0.0-100.0 ms
lay
Flanger Rate
2 0 - 1 Hz, note
sync
3 Flanger Rate 1 - 127 0.05-10.00 Hz
4 Flanger Rate 0 - 21 note (*1)
5 Flanger Depth 0 - 127 0-127
Flanger Feed-
6 0 - 98 -98- +98 %
back
Flanger Bal- D100:0W-
7 0 - 100
ance # D0:100W
8 Delay sync 0 - 1 ms, note
9 Delay Time 0 - 127 1-2600 ms
10 Delay Time 0 - 21 note (*1)
Delay Feed-
11 49 - 89 0- +80 %
back
Delay HF 200-8000 Hz,
12 0 - 17
Damp BYPASS
Delay Balance D100:0W-
13 0 - 100
# D0:100W
14 Level 0 - 127 0-127
MIDI Implementation
Description
Adjusts the delay time from the di-
rect sound until the chorus sound is
heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Volume balance between the direct
sound (D) and the chorus sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to BY-
PASS.
Adjusts the volume balance between
the sound that is sent through the de-
lay (W) and the sound that is not sent
through the delay (D).
Output Level
Description
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Volume balance between the direct
sound (D) and the flanger sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the di-
rect sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to BY-
PASS.
Adjusts the volume balance between
the sound that is sent through the de-
lay (W) and the sound that is not sent
through the delay (D).
Output Level
31