Entering The Machine Type Information - Konica Minolta bizhub C236DN Service Manual

Security Function Ver. 1.01 May 2016
F/W to be updated
FAX BOARD CONTROLLER3 FAX board/3 (FAXB/3)
FAX BOARD CONTROLLER4 FAX board/4 (FAXB/4)
ADF (DF-M)
FINISHER
SD
DSC1
DSC2
10.2.4

Entering the machine type information

• When MFP board is replaced, it is necessary to enter the machine type information.
• Refer to the following procedures to enter the machine type information.
A. Procedure
1. Insert the USB memory to the USB port.
2. Turn ON the main power switch.
3. Touch [Machine Type Select].
Appropriate board
DF control board (DFCB)
FS control board (FSCB)
SD drive board (SDDB)
DSC board/1 (DSCB/1)
DSC board/2 (DSCB/2)
41
10. Firmware rewriting
Remark
FK-515 is mounted
FK-515 is mounted
Only when DF-704/DF-629 is
mounted
Only when FS-533/FS-534 is
mounted
Only when FS-534SD is mounted
SC-508 is mounted
SC-508 is mounted
A7PUS1E021DA