Security Function Ver. 1.01 Feb. 2017
10.2.4
Entering the machine type information
• When MFP board is replaced, it is necessary to enter the machine type information.
• Refer to the following procedures to enter the machine type information.
A. Procedure
1. Insert the USB memory to the USB port.
2. Turn ON the main power switch while pressing the Stop key.
NOTE
• When [Administrator Settings] → [Security Settings] → [USB Connection Permis-
sion setting] → [External Memory (Service)] → [FW Update] is set to "Restrict", a
message "It is limited by the administrator." will appear, and update of the firm-
ware cannot be executed.
• When [Administrator Settings] → [Security Settings] → [FW Update (USB) Perm.
Sett.] is set to "Password Priority", it requires to input a password after confirming
with the administrator.
3. Touch [Machine Type Select].
43
10. Firmware rewriting
A9HJS1C021DA