Careless Servicing Hazards-Vital Information For Service Personnel (See Also Service Hazards Throughout Manuals) - Milnor MWF100C7 Manual

2.1.3.2.2 Careless Servicing Hazards—Vital Information for Service Personnel (see
also service hazards throughout manuals)
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Crush Hazards — Tilting machines only—The machine housing will
fore working under the tilted machine.
Do not operate the manual tilt valves with anyone under the machine.
�
Do not operate the tilt controls with anyone under the machine.
�
WARNING: Crush Hazards — Tilting machines with front and rear tilt cylinders—
the non-tilted end lift out of their cradles, even with safety supports in place.
Understand the consequences of operating manually.
�
WARNING: Confined Space Hazards — Confinement in the cylinder can kill or injure
Pellerin Milnor Corporation
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not service the machine unless qualified and authorized. You must
�
clearly understand the hazards and how to avoid them.
Abide by the current OSHA lockout/tagout standard when lockout/tag-
�
crush your body or limbs if it descends or falls while you are under it.
Housing can descend with power off or on. Manual operation of tilting
valves overrides safety interlocks. Improper operation of manual tilting
valves may cause the housing to descend.
Secure both red safety supports in accordance with the instructions fur-
�
nished, then lock out and tag out power at the main machine disconnect be-
The housing will fall and lunge forward or rearward if the tilt wheels on
you. Hazards include but are not limited to panic, burns, poisoning, suffo-
cation, heat prostration, biological contamination, electrocution, and
crushing.
Do not enter the cylinder until it has been thoroughly purged, flushed,
�
drained, cooled, and immobilized.
BNWHTS04.C07 0000235043 A.4 A.2 A.3 1/2/20 2:19 PM Released
Safety
9