Hazards Resulting From Damaged Mechanical Devices; Careless Use Hazards; Careless Operation Hazards-Vital Information For Operator Personnel (See Also Operator Hazards Throughout Manual) - Milnor MWF100C7 Manual

Hide thumbs Also See for MWF100C7:
Table of Contents

Advertisement

Available languages

Available languages

Safety
Do not operate the machine with any evidence of damage or malfunction.
2.1.3.1.2

Hazards Resulting from Damaged Mechanical Devices

WARNING: Multiple Hazards — Operating a damaged machine can kill or injure per-
void the warranty.
Do not operate a damaged or malfunctioning machine. Request authorized service.
WARNING: Explosion Hazards — Cylinder—A damaged cylinder can rip apart dur-
WARNING: Explosion Hazards — Clutch and speed switch (multiple motor ma-
2.1.3.2

Careless Use Hazards

2.1.3.2.1
Careless Operation Hazards—Vital Information for Operator Personnel
(see also operator hazards throughout manual)
WARNING: Multiple Hazards — Careless operator actions can kill or injure person-
warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
Do not operate a damaged or malfunctioning machine. Request authorized service.
Do not attempt unauthorized servicing, repairs, or modification.
Do not use the machine in any manner contrary to the factory instructions.
Use the machine only for its customary and intended purpose.
Understand the consequences of operating manually.
8
sonnel, further damage or destroy the machine, damage property, and/or
ing extraction, puncturing the shell and discharging metal fragments at
high speed.
Do not operate the machine with any evidence of damage or
malfunction.
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
Stop the machine immediately if any of these conditions occur: • ab-
normal whining sound during extract • skidding sound as extract ends •
clutches remain engaged or re-engage during extract
nel, damage or destroy the machine, damage property, and/or void the
BNWHTS04.C04 0000235046 A.4 A.2 A.3 1/2/20 2:19 PM Released
BNWHTS04.C05 0000235045 A.4 A.2 1/2/20 2:19 PM Released
BNWHTS04.C06 0000235044 A.4 A.2 A.3 1/2/20 2:19 PM Released
Pellerin Milnor Corporation

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Mwf100y7Mwf125c7Mwf125y7

Table of Contents