Table of Contents
Advertisement
Speakers
Description
Speakers (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Release the speaker cables from the routing clips (2) built into the battery.
3.
Remove the two Phillips PM2.0×3.3 screws (3) that secure the speakers to the bottom cover.
4.
Remove the speakers (4).
30
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
830761-001
24).
Advertisement
Table of Contents
