Table of Contents
Advertisement
Reverse this procedure to install the heat sink.
System board
NOTE:
The system board spare part kit includes an HDMI port, microSD card reader slot, USB port, WLAN
slot, and replacement thermal material.
Description
Equipped with an Intel Celeron N3050 1.60-GHz (SC turbo up to 2.16-GHz) dual core processor (1600-
MHz FSB, 2.0-MB L2 cache, 4.0 W), 2.0-GB of system memory, and the Windows 10 operating system
Equipped with an Intel Celeron N3050 1.60-GHz (SC turbo up to 2.16-GHz) dual core processor (1600-
MHz FSB, 2.0-MB L2 cache, 4.0 W), 2.0-GB of system memory, and a non-Windows operating system
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the battery (see
6.
Remove the WLAN module (see
7.
Remove the heat sink (see
Remove the system board:
40
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
32).
WLAN module on page
Heat sink on page
39).
24).
33).
Spare part number
837616-601
837616-001
Advertisement
Table of Contents
