Table of Contents
Advertisement
3.
Remove the eleven Phillips PM2.0×5.7 screws (3) that secure the keyboard/top cover to
the bottom cover.
4.
Turn the computer right-side up with the front toward you.
5.
Open the computer as far as it will open.
6.
Insert a case utility tool (1) or similar thin, plastic tool between the front edge of the keyboard/top cover
and the bottom cover.
7.
Lift the front edge (2) of the keyboard/top cover until it separates from the front edge of
the bottom cover.
Component replacement procedures
25
Advertisement
Table of Contents
