Introduction; Operating System Requirements; Media Requirements; Ribbon Requirements - Rimage Everest III User Manual

Introduction

This manual provides the information needed to operate the Rimage Everest III printer, identify the parts, and
configure printing preferences. To unpack and set up your Everest printer, refer to the Everest Unpacking and
Setup Instructions included with your product.

Operating System requirements

The Rimage Everest printer is compatible only with Windows
®
and Macintosh OSX v 10.3/10.4.

Media requirements

You must use discs that are coated with a surface designed for thermal printing. The media in Rimage Media
Kits™ is designed for optimum use in the Everest printer.
For more information about Rimage Media Kits™ – convenient packages of thermal retransfer-printable discs
and ribbons, all guaranteed by Rimage – contact Rimage at 800-445-8288.

Ribbon requirements

Important: Use only Everest III print ribbons with the Everest III printer. Print ribbons designed for the
Everest II printer or earlier will not print correctly in the Everest III printer.
The Everest printer requires a print ribbon and a retransfer ribbon. The standard print ribbon has three colors:
Cyan, Magenta, and Yellow (CMY). These three colors combine in printing to create full color discs. Print ribbons
are also available in black and CMY+White (CMY+W).
Ribbons
3-Color (CMY)
4-Color (CMY+W)
Black (monochrome)
Retransfer ribbon
Retransfer ribbon
110875_B
Part Number Number of Discs Printed
203638-001
203639-001
203640-001
203474-001
203384-001
®
2000 Professional, Windows
500
375
1000
500
1000
Introduction
®
XP Professional,
1