Checking The Remaining Ribbon - Rimage Everest III User Manual

Checking the remaining ribbon

The operator panel on some Rimage autoloaders displays the estimated number of prints remaining on the print
ribbon and the retransfer ribbon.
On standalone Everest III printers and AutoPrinters, the Status tab in the Status monitor for Windows allows you
to view information about the Everest printer such as:
Current firmware version
Progress of a print job
Installed ribbon type
Estimated percentage of prints remaining on the print ribbon
Estimated percentage of prints remaining on the retransfer ribbon remaining
Tip: If you remove a ribbon from the Everest printer and reinsert it, the system recognizes the amount of
ribbon remaining in the consumable monitoring application. Partially used ribbons from other Everest
printers will not display accurately in the consumable monitoring application.
110875_B
Operate the Everest printer
15