Install The Everest Printer Driver (Macintosh); Placing A Disc On The Printer Tray - Rimage Everest III User Manual

Install the Everest printer driver (Macintosh)

1.
Install the printer driver.
a. Insert the software disc in the computer disc drive.
b. Run the Rimage Everest Installer.
c. Select Install. The installation begins.
d. When the installation is complete, select Quit. The installation completes and the installation window
closes.
2. Add the Everest printer to your printer list.
Using OSX v 10.4
a.
Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b.
From the Print & Fax window, select
c.
From the Printer Name list, select CDPR22.
d.
Select Add. The printer is added to the printer list and the Printer Browser window closes.
e.
Close the Print & Fax window.
Using OSX v 10.3
a.
Navigate: System Preferences > Print & Fax. The Print & Fax window opens.
b.
From the Print & Fax window, select Setup Printers. The Printer List window opens.
c.
From the Printer List window, select Add. The Printer List window updates to display available
printers.
d.
From the printer list pop-up menu, sele
e.
From the printer list, select CDPR22.
f.
Select Add. The printer is adde
g.
Close the Print & Fax window.

Placing a disc on the printer tray

Use this procedure to place a disc on the pri
1.
To open the printer tra
the operator button.
2.
Place the disc on the print pad
with the printable surface facing
up and the stacking ri
the print pad.
Important! To avoid
scratching or damaging the
recording surface of the
disc, the disc must not res
on the holding pins or the
centering pin.
110875_B
ct USB. In the printer list, CDPR22 displays.
d to your printer list and the Printer List window closes.
nter tray.
y, press
ng facing
Print er
tray
t
Cent ering
pin
Operate the Everest printer
. The Printer Browser window opens.
Print pad
Holding pins
7