Ricoh CL4000DN Setup Manual page 56

Installing Options
I
Fasten the four screws to attach the cover.
J
Align the controller board with the left and right rails, and then push it
carefully in, until it stops.
❒ The printer may malfunction if the controller board is not properly installed.
K
Fasten the controller board to the printer using the three screws.
❒ After finishing installation, you can check the User Account Enhance Unit
is properly installed: Print the configuration page from the "List/Test Print"
menu. If it is installed properly, you will see "Accounting Module" for "Con-
troller Option".
56