Download Print this page

Exmark Lazer Z LZE Operator's Manual page 62

Advertisement

Maintenance
1. Spring
23.
Push the left wing deck back to the center deck.
Align and install the upper pivot deck pins in the
front and rear of the deck and secure with the
bolts that were removed previously (reference
Figure 44).
24.
Align the lift cylinder arm and reinstall the pin,
making sure that the locking tab is aligned with
the associated opening in the mount. Reinstall the
locking cotter pin to secure.
25.
Reattach the spring that was removed in Step 22
that applies pressure to the rear of the wing deck
cover.
26.
Reinstall the wing deck belts.
27.
Reinstall the wing deck belt shields and secure
with the lynch pins.
28.
Raise the wings to the transport position and
secure them in place with the clevis pins and
hairpins.
29.
Reinstall the height of cut pin.
Check Seat Belt
Service Interval: Before each use or daily
Visually inspect seat belt for wear, cuts, and proper
operation of retractor and buckle. Replace before
operating if damaged.
Check for Loose Hardware
Service Interval: Before each use or daily
Figure 46
1.
Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2.
Visually inspect machine for any loose hardware
or any other possible problem. Tighten hardware
or correct the problem before operating.
Service Air Cleaner
Service Interval: Every 100 hours—Clean
g351417
62
or Replace (if necessary)
the primary air cleaner
element — check
secondary air cleaner
element; replace if dirty.
(Briggs, Kohler, and
Kawasaki engines) (May
need more often under
severe conditions. See
the Engine Owner's
Manual for additional
information.)
Every 250 hours—Replace
the primary air cleaner
element — check
secondary air cleaner
element; replace if dirty.
(Kohler and Kawasaki
engines) (May need
more often under severe
conditions. See the
Engine Owner's Manual
for additional information.)
Every 400 hours—Replace
the primary air cleaner
element — check
secondary air cleaner
element; replace if dirty.
(Briggs engines) (May
need more often under
severe conditions. See the
Engine Owner's Manual
for additional information.)
Every 500 hours—Replace
the secondary air cleaner
element (Kohler, and
Kawasaki engines) (May
need more often under
severe conditions. See the
Engine Owner's Manual
for additional information.)

Advertisement

loading

This manual is also suitable for:

Lazer z lzsLazer z lzx411294212