Advertisement
Accessory Weight Table Worksheet:
Use the table below to determine if extra weight
is required for the unit. Identify the accessories
and correct deck size and place the corresponding
values in the Accessory Score column. If the Total
Accessory Score meets the following, add the
recommended weight kit.
Note: Rear Discharge and 72 inch side discharge
decks do not require a weight kit.
Note: "A5" Models are not compatible with an
UltraVac
Collection System.
®
Side Discharge Models Only:
48 inch
52 inch
Deck
Light Kit
2
Suspension
11
Seat/CRSS
Bagger
0
Pneumatic
6
Caster
Tires
Mulch Kit
-3
-2
Striper Kit
OCD02
-5
1
Hitch Kit
Sunshade
2
Kit
Total Accessory Score
Total Accessory Score
0 – 9
10 – 19
20 and Higher
*48 and 52 inch models that have an under toe
board weight as standard, can add an additional toe
board weight for primary accessory weighting (scores
10-19); and front toe board weight kit for secondary
accessory weighting (scores 20 and higher). Other
60 inch
Accessory
Deck
Deck
Score
3
2
12
3
0
3
8
5
-4
-5
0
0
-7
-4
2
1
3
2
Required Weight Kit(s)
None required
*116-1173 Under toe
board mount weight kit
*Two 116-1173 Under toe
board mount weight kits
or one 116-1173 Under toe
board mount weight kit
and one 116-1238 Front
toe board mount weight
kit
units should install a first under toe board kit for
primary accessory weighting (scores 10-19); and a
second under toe board kit for secondary accessory
weighting (scores 20 and higher).
*Models that have an under toe board mount weight
as standard, require 116-1238 front toe board top
mount kit instead of 116-1173.
Torque Requirements
Bolt Location
Blade Drive Sheave
Mounting Nut (E and
S-Series)
Blade Drive Sheave
Mounting Nut (X-Series)
Cutter Housing Spindle
Nut (X-Series)
Blade Mounting Bolt
(lubricate with anti-seize)
Anti-Scalp Roller Nyloc
Nut–Side Discharge
Models (See Figure 27)
Anti-Scalp Roller Nyloc
Nut–Rear Discharge
Models (See Figure 28)
Engine Mounting Bolts
Wheel Lug Nuts
Wheel Motor Mounting
Bolts
Wheel Hub Slotted Nut
—All Except Wing Deck
Models
Wheel Hub Slotted Nut
—Wing Deck Models
Rollover Protection
System (Roll Bar) 1/2
inch Mounting Bolts
Clutch Retaining
Bolt (secured with
threadlocker)
Rear Discharge Side
Bumpers
25
Specifications
Torque
130-160 ft-lb
(176-217 N-m)
90-110 ft-lb
(122-149 N-m)
160-185 ft-lb
(217-251 N-m)
50-60 ft-lb (68-81 N-m)
50–55 ft-lb (68-75 N-m)
30-35 ft-lb (41-47 N-m)
27-33 ft-lb (37-45 N-m)
85-105 ft-lb
(115-142 N-m)
67-83 ft-lb
(50-113 N-m)
211-260 ft-lb
(286-352 N-m)
310-340 ft-lb
(420-461 N-m)
100-110 ft-lb
(136-149 N-m)
55-60 ft-lb (75-81 N-m)
10-12 ft-lb (14-16 N-m)
Advertisement
