Advertisement
• PTO must be disengaged, brake engaged, and
motion control levers out (neutral lock) to start
engine. (It is not necessary for the operator to be
in the seat to start the engine.)
• Operator must be in seat when PTO is engaged,
brake is disengaged, or motion control levers are
moved in or engine will stop.
• Engine will stop if either the left, the right, or
both levers are moved from neutral lock position
while brake is engaged.
Operator Controls
• Steering and Motion Control:
Note: Motion control levers are adjustable to
two heights.
– Separate levers, on each side of the console,
control speed and direction of travel of the
respective drive wheels.
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
• PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
• Parking Brake Lever: Engages/Disengages
parking brake.
• Deck Height Adjustment Lever: Sets cutting
height to desired position.
• Deck Lift Pedal: Foot pedal that lifts deck.
• Deck Lift Switch (Hydraulic Cylinder)–96 Inch
Deck Models: Raises/lowers the center deck to
set cutting height and folds/unfolds the wings.
• Transport Lock:
–
Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
• X-Series:
– All Models Except "C1":
Deluxe suspension (adjustable spring
suspension) seat with high back, padded
flip-up armrests, and integral safety switch.
Seat height remains the same. Seat Isolation
System for reduced vibration, to enhance ride
of standard seat.
– "C1" Models:
Standard seat with high back, extra wide foam
padded seat cushion with internal suspension,
thick bolstering, two-tone cover, padded
flip-up armrests, integral safety switch, and
Seat Isolation System for reduced vibration, to
enhance ride of standard seat.
• S-Series:
– "00" Models:
Standard seat with high back, extra wide foam
padded seat cushion with internal suspension,
thick bolstering, two-tone cover, padded
flip-up armrests, integral safety switch, and
Seat Isolation System for reduced vibration, to
enhance ride of standard seat.
– "A1" and "A2" Models:
Deluxe suspension (adjustable spring suspension)
seat with high back, padded flip-up armrests, and
integral safety switch. Seat height remains the
same. Seat Isolation System for reduced vibration,
to enhance ride of standard seat.
• E-Series:
– "00" or "03" Models:
Standard seat with high back, extra wide foam
padded seat cushion with internal suspension,
thick bolstering, two-tone cover, padded
flip-up armrests, integral safety switch, and
Seat Isolation System for reduced vibration, to
enhance ride of standard seat.
Optional seat accessories for units with
standard seats:
◊ Deluxe suspension seat with high back,
(adjustable spring suspension), padded
flip-up armrests, and integral safety switch.
Adds approximately 1/2 inch (1.3 cm) to
seat height.
◊ Seat Isolation System for reduced
vibration, to enhance ride of standard
seat, standard seat with Custom Ride Seat
Suspension or Deluxe Suspension Seat.
Adds approximately 1 inch (2.5 cm) to
seat height.
– "C1" Models:
19
Specifications
Advertisement
