Connecting The Printer; Network Connection - Ricoh Aficio SP 8100DN Hardware Manual

3. Connecting the Printer

Network Connection

Follow the procedure below to connect the printer to the computer through the
network. Prepare the hub and other network devices before connecting the
10BASE-T or 100BASE-TX cable to the printer's Ethernet port.
Alternatively, the optional gigabit ethernet board, which supports 1000BASE-T,
is available.
Important
❒ Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒ The Ethernet cable is not supplied with this printer. Select your cable accord-
ing to the network environment.
A
Attach the supplied ferrite core at the printer end of the Ethernet cable.
B
Connect the Ethernet cable to the Ethernet port.
C
Connect the other end of the cable to the printer's network, such as a hub.
AQV744S
AQV507S
45