Ricoh Aficio SP 8100DN Hardware Manual page 93

Paper and Other Media
Specifying Custom Size Paper for the Bypass Tray
Important
❒ When loading custom size or special paper, specify the paper size using the
control panel and printer driver.
❒ Paper sizes between 148 - 600 mm (5.83-23.62 in.) in length and 100 - 297 mm
(3.94-11.70 in.) in width can be loaded in the bypass tray. However, the size
range varies depending on a type of printer drivers. For details, see the print-
er driver Help.
❒ Be sure to set a same size using the control panel and the printer driver. If you
set different size, printer error will occur.
❒ You cannot print on custom size paper with an application that does not sup-
port the custom size setting.
A
Press the {Menu} key.
5
B
Select [Paper Input] using {T} or {U}, and then press the {q Enter} key.
C
Select [Bypass Size] using {T} or {U}, and then press the {q Enter} key.
D
Select [Custom Size] using {T} or {U}, and then press the {q Enter} key.
82
AQV251S