Ricoh 480W Operating Instructions Manual page 110

Specifications
❖ ❖ ❖ ❖ Format Overlay
• When the sizes of the format (background original) and original to be over-
laid on the format are different, the image is created at the size of the over-
laid original.
• The maximum paper size is A0 (E). However, if you create a copy using
A0(E) size paper, the composite image data is lost.
• When scanning the format (background original), the output image may
be blurred. If this happens, copy the format, and then use it as the back-
ground original.
• When using the Format Overlay function, image quality may deteriorate.
• You cannot change the image density of a format original. To achieve a de-
sired image density, scan an original with the image density changed be-
forehand.
❖ ❖ ❖ ❖ Erase Border
• You can specify the width of the erased border margins from 2 to 99 mm
5
(0.1" to 3.9") in increments of 1 mm (0.1").
❖ ❖ ❖ ❖ Erase Inside
• By combining "Erase Inside 1"– "Erase Inside 5", you can erase up to 5 ar-
eas at the same time.
❖ ❖ ❖ ❖ Margin Adjustment
• You can specify margins from 0 to 200 mm (0 to 7.9") in increments of 1 mm
(0.1").
❖ ❖ ❖ ❖ Preset Stamp
• You can stamp onto paper sizes up to A0 (E) K.
• When you change the size of the stamp, it may be cropped depending on
the paper size.
❖ ❖ ❖ ❖ User Stamp
• You can stamp onto paper sizes up to A0 (E) K.
❖ ❖ ❖ ❖ Date Stamp
• You can stamp onto paper sizes up to A0 (E) K.
❖ ❖ ❖ ❖ Page Numbering
• When using page numbering with the paper bypass selected, the stamp
position is based on original size multiplied by the magnification ratio.
102