Removing the antenna cables
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
stability
foot.
2. Remove the left and right side-panels. See
3. Remove the
handle
bars.
4. Remove the
graphics
card.
5. Remove the
wireless
card.
6. Remove the
front
bezel.
7. Remove the
rear
bezel.
Procedure
1. Disconnect the antenna cables from the wireless card.
2. Remove the gray antenna cable from the routing guide on the chassis.
1. antenna cables
3. routing guide
computer. After working inside your computer, follow the instructions in
"Removing the side
panels".
2. wireless card
4. chassis
After working inside your
117