Saving The Current Route - Raymarine SL72 Owner's Handbook Manual

5-22

Saving the Current Route

You can save up to 20 named routes in the route database list. These routes can
then be re-displayed and followed at a later date. When you save the route, all
new waypoints are saved in the Waypoint List.
Note: If the current route has not been saved, when you attempt an operation
that affects this route, e.g. CLEAR ROUTE , you are prompted to save it.
➤ To save and name the current route:
1. To access the SAVE ROUTE soft key, press the ROUTE soft key, followed by
MORE .
2. Press the SAVE ROUTE soft key. The save route pop-up and the NAME ROUTE
soft keys are displayed as illustrated in Figure 5-6.
3. The next available entry on the route list is highlighted.
(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing route that you no longer require).
Figure 5-6:
4. If you do not wish to name or re-name the route, press the NO soft key to
clear the list. The route is saved and is listed as Route Not Named.
If you wish to name the route press the YES soft key. Use the trackpadto
move the cursor right or left to the character you wish to edit. Then use the
top or bottom of the trackpad to increase or decrease the letter or number.
SL72 & SL72RC PLUS Pathfinder Radar & Radar/Chartplotter
SAVE ROUTE
Save Route Window
D4155-1