Chapter 5: Standard Chart Operations (SL72RC PLUS only)
➤ To receive incoming waypoints on SeaTalk or NMEA:
1. To display the waypoint list press MARKS followed by the WAYPOINT LIST
MARKS
soft key.
Press the WAYPOINT TRANSFER soft key.
2. Press the soft key RECEIVE WPTS FROM ST/NMEA .
The soft key changes to STOP RECEIVING WAYPOINTS .
When waypoints are transmitted by other equipment they are added to the
waypoint list on the chartplotter. Routes transmitted on NMEA are
appended to the route list.
3. To disable waypoint transfer, press the soft key STOP RECEIVING WAY-
POINTS .
Alternatively, press ENTER , or CLEAR , twice to close the Waypoint List.
➤ To send the waypoint list on NMEA:
1. Display the waypoint list as previously described, then press the WAY-
POINT TRANSFER soft key.
2. Press the soft key SEND WPT LIST ON NMEA .
The soft key changes to STOP SENDING WAYPOINTS .
The waypoint and route lists are transmitted from the chartplotter to other
instruments on NMEA.
USER CARD MENU
5-37